Samsung N220: Unterschied zwischen den Versionen
Rkr (Diskussion | Beiträge) |
Rkr (Diskussion | Beiträge) |
||
Zeile 130: | Zeile 130: | ||
</pre> | </pre> | ||
''vgdisplay'' | ''vgdisplay'': | ||
<pre> | <pre> | ||
--- Volume group --- | --- Volume group --- |
Version vom 17. April 2010, 14:36 Uhr
Offizielle Infos und Support von Samsung
- N220-Marvel (NP-N220-JA02DE)
Für Backup und Restore des Windows-Krams:
- How To Use Samsung Recovery Solution 4 (Backup)
- How To Use Samsung Recovery Solution 4 (Restore)
Spezifikation
- Intel Pineview Plattform
- Prozessor: Intel® Atom™ Processor N450 (512K Cache, 1.66 GHz), Wikipedia
- Display: 1024x600 Pixel
- Grafik: Intel® Graphics Media Accelerator 3150 (Intel® GMA 3150)
- Quick Reference
- notebookcheck.com
- max. Auflösung am externen Display (VGA): 1400x1050 (N450, N470), 2048x1536 (D410, D510)
- LAN: Marvell Yukon 88E8040 PCI-E (10/100 MBit)
- WLAN: Atheros AR9285, siehe wireless.kernel.org
- Sound: Realtek ALC269 @ Intel 82801GBM
Testberichte und Infos
- ndevil.com
- N-Modelle ndevil.com
- notebookcheck.net
- Amazon
- tomshardware.de
- mini-notebook-laptop.com
- netzwelt.de
- zdnet.de
- arcor.de (PC-WELT Test)
- Erfahrungsbericht Samsung N220 – Pine Trail Netbook
Foren und Wikis
- archlinux.org - Samsung N150
Windows Auslieferungszustand
Partitionstabelle nach Einrichtung:
Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x9d97ba08 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 7193 41943040 7 HPFS/NTFS /dev/sda4 7193 30402 186422272 f W95 Ext'd (LBA) /dev/sda5 7193 29829 181820416 7 HPFS/NTFS /dev/sda6 29829 30401 4598464+ 49 Unknown
- sda1: Wiederherstellungspartition (Samsung Recovery Solution)
- sda2: SYSTEM-Partition (daraus wird Windows gebootet)
- sda3: C-Laufwerk
- sda4: Extended
- sda5: D-Laufwerk
- sda6: - (nicht benutzt)
Firmware (nach Update): 08JI
Linux/openSUSE Unterstützung
Kernel-Modul mit N220-Support ggf. geplant, siehe samsung-laptop.ko
GMA 3150 Grafik:
- unterstützt seit xf86-video-intel 2.10.0 release (Jan 2010)
- enthalten ab openSUSE 11.3 (Milestone Releases), Xorg 7.5
- kernel mode-setting (KMS) mandatory, ab Kernel 2.6.32
Probleme:
- Handbuch nur im Flash-Format und zudem nur als exe-Datei
- BIOS-Update nur als exe-Datei
Konfiguration unter openSUSE 11.3 Milestone 5
Die meisten Tipps und Vorschläge wurden übernommen von der Seite Samsung N150 auf archlinux.org.
Installation
Die Installation von openSUSE 11.3 Milestone 5 musste im Textmodus erfolgen mit dem Kernel-Bootparameter "acpi=off", da Maus und Tastatur in Yast im Grafikmodus nicht funktionierten. Nach der Installation trat dieses Problem nicht mehr auf.
Partitionierung
Für Windows 7 wurde erstmal eine 40GB Partition behalten (sda1-sda3), um z.B. BIOS-Updates machen zu können. Der Rest wurde für Linux partitioniert, wobei eine normale Partition für /boot (sda5) eingerichtet wurde und der Rest für Verwendung mittels LVM (sda6).
fdisk -l /dev/sda:
Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d97ba08 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown /dev/sda2 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 7193 41943040 7 HPFS/NTFS /dev/sda4 * 7194 30401 186418260 f W95 Ext'd (LBA) /dev/sda5 7194 7218 200781 83 Linux /dev/sda6 7219 30401 186217416 8e Linux LVM
cat /etc/fstab:
/dev/vgsystem/root / ext4 acl,user_xattr 1 1 /dev/mapper/cr_data /data ext4 acl,user_xattr,nofail 0 0 /dev/vgsystem/swap swap swap defaults 0 0 /dev/disk/by-id/ata-SAMSUNG_HM250HI_S20TJ9BZ216055-part5 /boot ext4 acl,user_xattr 1 2 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0
pvdisplay:
--- Physical volume --- PV Name /dev/sda6 VG Name vgsystem PV Size 177.59 GiB / not usable 968.00 KiB Allocatable yes PE Size 4.00 MiB Total PE 45463 Free PE 2 Allocated PE 45461 PV UUID acjsI7-OsNy-3NFW-816J-n53o-tBqp-DAZV0Q
vgdisplay:
--- Volume group --- VG Name vgsystem System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 3 Max PV 0 Cur PV 1 Act PV 1 VG Size 177.59 GiB PE Size 4.00 MiB Total PE 45463 Alloc PE / Size 45461 / 177.58 GiB Free PE / Size 2 / 8.00 MiB VG UUID RZWnh9-r41m-dIpo-2d5z-bZoE-oOvu-fTnKIk
lvdisplay:
--- Logical volume --- LV Name /dev/vgsystem/data VG Name vgsystem LV UUID xMbY2e-m1rm-ej2h-raVC-Eoey-DDZB-eMDavx LV Write Access read/write LV Status available # open 1 LV Size 143.58 GiB Current LE 36757 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/vgsystem/root VG Name vgsystem LV UUID 5wPLgI-oiLp-OsE8-NFsM-tZvl-kA1s-fCLqZg LV Write Access read/write LV Status available # open 1 LV Size 30.00 GiB Current LE 7680 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/vgsystem/swap VG Name vgsystem LV UUID Rge7xU-Ilzm-EOuV-ef8D-ONoO-M1Oi-SFLUHB LV Write Access read/write LV Status available # open 1 LV Size 4.00 GiB Current LE 1024 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2
Ethernet
Das 10/100 MBit/s Interface wird direkt erkannt. Kernel-Modul ist sky2.
Audio
Kein Problem, wird automatisch erkannt und unterstützt. Kernel-Module snd_hda_codec_realtek und snd_hda_intel.
Grafik und Display
Die Xorg Version 7.5 arbeitet sehr gut zusammen mit dem Grafik-Chip, ohne Erstellung einer /etc/X11/xorg.conf.
Umschaltung der Grafik-Ausgabe
Externes Display mit 1920x1080 ansteuern (was entgegen der Spec funktioniert):
xrandr --output VGA1 --mode 1920x1080
Internes Display ausschalten:
xrandr --output LVDS1 --off
Wieder das interne Display initialisieren/einschalten:
xrandr --output LVDS1 --mode 1024x600
Externes Display ausschalten:
xrandr --output VGA1 --off
Das Script kann genutzt werden und auf Fn-F4 gelegt werden, um das Display umzuschalten.
Helligkeit des interne Displays
Siehe Script archlinux.org. Das Script funktioniert auch auf dem N220.